Barska M-4 Handguard Rail Mount | P Moss Photography

Barska M 4 Handguard Rail Mount @ Amazon.com

The Tippmann paintball gun Frostbite Sniper Kit with the Tippmann X-7 Phenom Is one of the most standard packages for sniper action. This kit will arm you with all you need to become completely battle ready. Let me break this kit down for you.

The barrel comes in two sizes 12″ Raptor Tactical Rifle Type D

Or 18″ Raptor Tactical Rifle Type D

The 18in barrel, included in the kit will give you much added distance to your shot, This is a will have to if you are going to be a sniper. This barrel has groves in it. This is called Rifling. It means the barrel has tracks and groves running down the length of the barrel. This enables the paintball to have a straighter and spun free shot. But a more primary vantage is it adds distance to your shot as well as adding accuracy.

Available at an further and added cost is the Carbine Buttstock for the A-7.

This kit comes with

- 1 x Tippmann X7 Phenom Carrying Handle

- 1 x Tippmann X7 Phenom Carbine Buttstock

- 1 x Tippmann X7 Phenom Vertical Grip.

Another great add-on would be the Electronic Trigger for the Tippmann X-7

The external mode Tippmann X7 Electronic Trigger may shoot up to 20 bps and features 5 firing modes including semi auto, turbo, 3-shot safety burst, automati response and full safety auto. New weatherproof system is great for woodsball play and may change modes on the fly. Internal mode system may likewise be set to semi-auto to grant the Electronic Trigger to meet regulatings of any coordinated field event. Requires 9 volt battery not included.

Next we have the Handguard: Frostbite Sniper RIS Handguard for Rator Tactical Barrel.

Included in the kitis the Duel Universal Offset Mount.

You will need a RIS Bipod with a 45 degree swivel.

Features come with:

- 1x Lens cover

- 2x Ring Mount

- light and compact design

This M4 Carbine Bipod has a 45 degree swivel that be may be mounted on fore grip system, rail or carbine style hand guard. This bipod is made of 100% metal for long lasting use and abuse. Tired of bipods that don’t swivel? Well, with this bipod, you may rotate your marker left to right with regards to 45 degrees! Now you may take intention at multiple targets without having to move your whole rifle, this is a will have to have bipod if you want to stay as still as possible.

For the woodsman/sniper a Silencer: Gem Tech Thread -on-Silencer for Tactical Barrel

Also necessitated is a Tactical 9 x 32 Sniper Scope.

Powerful rifle scope with 600 feet range. This scope is best use for sniper and to locate your opponent’s location.

And last but not least included in the kit would be your X-7 Phenom Marker.

Now you are ready for any kind of action or circumstance in the woods. Happy hunting!

Barska M 4 Handguard Rail Mount

Rail Type: Weaver/ Picatinny, Rail Length: 5.9″ , Material: T6 Aluminum, Applicable Firearms: M-4, AR-15, M-66

Amazon Sales Rank: #64495 in Sports & Outdoors
Color: Black
Brand: Barska
Model: AW11137
Number of items: 1
Dimensions: .40″ h x 5.40″ w x 5.40″ l,

Specially for M-4, AR-15, M-66 rifles.
Weaver/Picatinny style.
Made of T6 Aluminum.
Rail length:5.9 inches.
Durable and rugged.

0 of 0 people found the following review helpful.
Good fit on Colt 6920 M4 w/ double heat shields
By A. Williams
Just installed this rail on the lower handguard on a Colt 6920 M4 Sporter Carbine with the double heat shields. When I first approached the project, it appeared that the double heat shields were going to be a problem since they are apoxied in place. Also, there are no instructions included to help with installation. But, after looking it over, I could see that the heat shields can remain in place and the flat nuts provided could be slipped in between the heat shields and pushed to their location with a flat tool. After pushing as far as possible with the flat tool, leverage them into their location at the other end. There is some minor resistance. Make sure the flat side of the nut is facing to the inside of the handguard. I then slipped folded pieces of paper in between the heat shields in such a way as to press and hold the nuts against the body of the handguard. This eases the starting of the bolts with the two provided lock washers installed. Position the rail on the handguard and tighten down. Adjust the position of the rail to your liking before final tightening of the bolts. In my case, the tightening process tweaked the heat shield just a bit, so don’t overtighten, or you’ll make it worse. Remove the paper. Make sure the heat shields on the two halves of the handguard are aligned properly before snapping the handguard halves in place on the gun. With just a little effort, I now have a good looking, solid and functional rail on a stock handguard. A Knight’s Armament grip I have, fits perfectly. I like the taper built into the base of the rail which keeps things parallel with the barrel. The final product deserves 5 stars, but I’m only giving 4 stars due to the lack of detailed instructions, which required me to think a little outside the box and put the extra effort with some trial and error into the installation. This is not a perfect product, I can see how it might not work in every application, but it works for me, in this particular case.

0 of 0 people found the following review helpful.
The Perfect Rail
By Charles R., Erps
I purchased this rail to convert my Kel-Tec SU16C from its plastic rail to an Aluminum rail. The original rail could not be zeroed with out shiming the rings to one side. To correct I used this rail after fileing off the top of the original plastic rail. Epoxied and thru bolted this rail is not only firmly attached, but is also in line with bore. This rail has worked out perfect for my needs.
Charles R. Erps
CUSTOM GUN RESTORATIONS
Oak Harbor, Wa

0 of 0 people found the following review helpful.
Good rail for an AR15
By BB
Fit perfectly on my M-4 hand guard, even has the correct taper to line up with the barrel which is important for mounting lasers. Nice sturdy build and mounts securely. Glad I tried this as it has room for a weapon light and bi-pod or grip and has holes that line up with the handguards vent holes.

See all 8 customer reviews…